PERENCANAAN DAN PEMBUATAN ALAT PEMERAS SARANG MADU MENGGUNAKAN METODE CENTRIFUGAL BERBAHAN STAINLESS STEEL DENGAN PENGGERAK MOTOR DC BERBASIS MIKROKONTROLER AT89S51

DONNY ARDHIANTO

Abstract


During this cultivation or honey bee in the honey bee farm is conventional in the honey in the honeycomb. That is the rack with honeycomb cloth or put a wasp nest in the tube manually ago played out until the honeymoon. This is less efficient and less hygienic, which processes honey from the nest need a long time and the level of health food that is less assured. Because it is then necessary wringer honeycomb with a fast process and the level of health food that guaranteed. Also practical and can be operated using a battery so that Portable or can be moved where. Tool design and making extortioner honeycomb with centrifugal method of stainless steel based mikrokontroler AT89S51 using asembely as a programming language, supported with several components, namely aleh dc motor, ADC 0804, and F to V LM2907. In the process of measurement hardware that has become a control system uses a digital multi meter to see the output voltage generated by each control block. While to know the number of motor cycles that is used as a prime task in this final use tacho meterand the appearance of the 7 Segment display.

 

Keyword : Mikrokontroler AT89S51, motor dc, bahasa asembely, display 7 Segment

 

Jurnal Terkait:   http://skripsi.umm.ac.id/files/disk1/320/jiptummpp-gdl-s1-2009-donnyardhi-15956-Pedahulu-n.pdf


Keywords


Mikrokontroler AT89S51; motor dc; bahasa asembely; display 7 Segment; umm